Secure your long-term success with a simple strategy to promote value and reduce harm
Our services for you
Guidelines and standards research
Which guidelines are relevant to your product and what standards apply?
We research national, European and international guidelines, laws and standards for you.
We monitor the validity of any standards that apply to you and inform you of any significant changes.
Processing knowledge on standards
Our interdisciplinary team of engineers and technicians is skilled in electronics, control engineering, mechanics, hydraulics and pneumatics and is ready to support you in understanding the requirements laid down by standards. We do this with:
Training sessions and workshops to transfer knowledge to your business
Review of your products to determine compliance with standards
Machine guidelines and risk assessment:
We work closely with your designers to support the development of new products:
Designing user-friendly safety concepts using the latest safety technology.
Risk assessment in accordance with Machinery Directive 2006/42/EC and EN ISO 12100
Conformity assessment procedure and CE
Does this product need to be CE-certified? What certification is required? Does a declaration of compliance or incorporation need to be issued?
Our employees are here to support you throughout the conformity assessment procedure and can help you prepare any supporting documents.
Functional safety and probability of failure
We analyse your systems using recognised failure analysis methods such as FTA (fault tree analysis) and FMEA (failure mode and effects analysis)
We help you develop electrical, electronic and programmable systems to perform safety functions
We validate your hardware and software in accordance with EN ISO 13849-2 and IEC 61508 requirements
What tests do you need to complete before you can distribute your products?
We support you with the following tests:
EMC testing (electromagnetic compatibility in accordance with 2014/30/EU)
Noise emission measurements (e.g., in accordance with outdoor equipment Noise Directive 2000/14/EC)
Type approval tests by accredited providers
Defining the requirements for type tests, routine tests and strength tests
Vibration and noise measurements
Electrical safety testing
We can help you prepare:
Operating and installation instructions
Compliance documentation, acceptance checklists and test reports
Our core capabilities
Machinery Directive 2006/42/EC,
Ergonomic aspects for machinery,
Electrical equipment for machinery in accordance with EN 60204-1,
Safety of control systems in accordance with EN ISO 13849-1 and -2,
Risk assessment of sets of machines and machine facilities,
Adjustments to old machinery made prior to the Machinery Directive,
Low Voltage Directive 2014/35/EU and Low-voltage switchgear and controlgear assemblies in accordance with EN 61439-1,
Accompanying company and team development processes
Bernhard Leimegger ist Gesellschafter der SYSTENT GmbH. Er beschäftigt sich mit den Themenschwerpunkten Systemische Organisationsentwicklung, Managementberatung, Teambildung, Teamentwicklung und Produktzertifizierung. Daneben hält er Vorträge und Seminare zu den Themen: Systemische Organisationsentwicklung, Managementsysteme, Produktzertifizierung und Kommunikation.
Andreas Wenter ist Gesellschafter der SYSTENT GmbH mit den Themenschwerpunkten Produktsicherheit, Maschinensicherheit, Arbeits- und Gesundheitsschutz, Sicherheitstechnik sowie Entwicklung der Managementsoftware AsiX. In den genannten Fachbereichen ist er als Unternehmensberater tätig und hält entsprechende Vorträge und Seminare.
Head of training department; occupational safety, safety technology, product safety, building physics
Gesellschafter der SYSTENT GmbH und zuständig für die Qualitätssicherung, Teamleiter Lerndienstleistungen. Die Dienstleitungsschwerpunkte bilden die Produktzertifizierungen, Arbeitsschutzmanagementsysteme und technische Aspekte des Arbeitnehmerschutzes. Referent für Schulungsveranstaltungen zu spezifischen Themen wie elektromagnetische und künstliche optische Strahlung, Europäische Produktsicherheitsrichtlinien, elektrischen Risiken.
Thomas Ganthaler ist Freiberufler und als solcher in das Kollegium der Periti Industriali und der Periti industriali mit Laureat der Provinz Bozen eingeschrieben. Er ist seit 2008 freier Mitarbeiter der Systent GmbH. Seine Tätigkeitsschwerpunkte liegen in den Bereichen Beratung im Arbeits- und Gesundheitsschutz, Beratung bei Produktzertifizierung und Maschinensicherheit, Bildungs- und Referententätigkeit im Themenbereich Arbeits- und Gesundheitsschutz
Head of product safety department; occupational safety, safety technology
Berater mit mehrjähriger Berufserfahrung im Bereich Industrieautomation, Steuerungstechnik und Maschinenbau. Seine Dienstleistungsschwerpunkte bilden die Bereiche Produktzertifizierung in Zusammenhang mit Sicherheit von Maschinen und sicherheitsbezogenen Teilen von Steuerungen.
We supported the project from the very beginning and handled product safety in accordance with the Machinery Directive and compliance with relevant technical standards. We also prepared user-friendly safety arrangements and created technical documentation as well as acceptance documentation.
SYSTENT provides both expertise and trust. Thanks to expert, professional support we were able to have our product certified without any major hurdles. The advantage of using a consulting firm like Systent is that their advisers are always on hand when problems arise. This means they’re also a huge help in any early development stages. You need a service like this in today’s world because standards and guidelines are constantly changing as technology continues to develop at breakneck speed. We will certainly be using this type of service again in the future for other projects.
Project leader Systent
Our tasks were to inform the constructors of all the safety regulations that needed to be considered (right at the very beginning of the project, i.e. the start of the planning stage), to periodically review the project for compliance with these regulations, to verify the results on the finished product and to arrange the necessary acceptance tests.
We carried out detailed research based on the information provided by the manufacturer and defined the guidelines, standards and regulations that needed to be considered.
Target/actual comparisons were carried out in regular discussions and solutions worked out together. We created supporting documents and the basic outline of the operating and maintenance instructions as development continued. Initial tests on the prototypes were carried out together to verify that the results recorded were as expected.
Project leader Systent
Prime Tech AG
Seik Ltd was commissioned to develop and build a crane system that would be used to construct a railway bridge over the Chenab River in India. The company developed a system that allowed components weighing up to 400 kN to be transported to the construction site. These parts were lifted over 500 metres above the surface of the water.
Projects of this scale are extremely complicated for everyone involved and it was a challenge to coordinate the wide variety of requirements and process all the necessary information so that it was available on time.
we supported the project from the very beginning and handled project management, product safety in accordance with the Machinery Directive and compliance with relevant technical standards. We also created technical documentation, prepared technical approvals, scheduled acceptance by the end client and created acceptance documentation.
Project leader Systent
Progress developed a mesh welding plant that’s 80m in length and 30m in width. The system uses the latest automation technology to weld bespoke mesh in longitudinal and transverse sections with the highest workplace safety and manageable costs. Bespoke mesh with variable spacing, dimensions and wire diameters can be custom-made according to CAD-CAM specifications.
We supported the project from the very beginning and handled product safety in accordance with the Machinery Directive, the Low Voltage Directive and the EMC Directive as well as compliance with relevant technical standards. We also prepared user-friendly safety arrangements and created technical documentation as well as the required supporting documents, operating and maintenance instructions and acceptance documentation.
Project leader Systent
Progress Maschinen & Automation AG
Take responsibility for a healthy lifestyle
Health day 2023
April 20, 2023
Topics include: Occupational health care, wellbeing education, conscious nutrition and stress management (in german language).